External Components; Using External Audio/Video Players; Rear View Camera; Controlling Audio - Kenwood DMX125DAB Kurzanleitung

External Components

Using external audio/video players

Ñ Starting playback
1
Connect an external component to the AV-IN
input terminal. (P.14)
2
Press the <8MENU> button.
3
Touch [AV-IN].
4
Turn on the connected component and start
playing the source.
Ñ For Video playback
1
When the operation buttons are not displayed
on the screen, touch the display.

Rear view camera

To use a rear view camera, the REVERSE lead
connection is required. For connecting a rear view
camera. (P.14)
Ñ Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
• To erase the caution message, touch the screen.

Controlling Audio

You can adjust various settings such as audio
balance or subwoofer level.
1
Press the <AUD> button.
2
See the below for each operation method.

Controlling General Audio

1
Press the <AUD> button.
2
Touch [Fader / Balance].
3
Set each item as follows.
1
[Fader Balance]
Balance
[U] [T]
Fader
[R] [S]
[INITIALIZE] To clear the adjustment.
Adjust the left and right volume
balance.
15 (right) to 15 (left)
Adjust the front and rear volume
balance.
15 (front) to 15 (rear)
English |
9