Digital Radio; Digital Radio Basic Operation; Digital Radio Setup - Kenwood DMX125DAB Kurzanleitung

Digital Radio

Digital Radio

Digital Radio Basic Operation

1
Press the <8MENU> button.
2
Touch [Digital Radio].
Ñ Source control screen
2
3
1 Displays the information of the current service:
Service name, Ensemble name, PTY Genre,
Channel
2 [DAB] : Switches the Digital Radio preset band.
"DAB1", "DAB2", "DAB3"
[DLS] : Display the Dynamic Label Segment
screen
[E] [F] : Select an ensemble, service, and
component.
[ ] : Displays the Digital Radio Setup screen.
(P.5)
3 Recalls the memorized service.
When touched for 2 seconds, stores the current
receiving service in memory.
Ñ Store a services
You can store the current receiving service in
memory.
1
Tune in to a service you want to preset.
2
Touch and hold [#] (#:1-5) in which you want to
store the service.
Ñ Select a stored service
1
Touch [#] (#:1-5).

Digital Radio Setup

1
Touch [
2
Set each item as follows.
1
[Service List]
Displays the Service List screen.
• [ ] : Touch and then touch [Yes] to find the latest
service list.
[TI]
Switches to the traffic information automatically
when the traffic bulletin starts.
"ON", "OFF" (Default)
[PTY]
Searches for a program by program type.
[Priority]
If the same service is provided by Radio Data System
when reception of the service being provided by
Digital Radio becomes poor, automatically switches
to Radio Data System.
"ON", "OFF" (Default)
[Announcement Select]
Switches to the set Announcement service.
[Related Service]
When you select ON, the unit switches to a related
service (if exists) when a DAB service network is not
available. Default is "OFF".
[Antenna Power]
Sets power supply to the Digital Radio antenna. Set
to "ON" when the Digital Radio antenna in use is
equipped with a booster. Default is "ON".
3
Touch [6].
].
English |
5