Technical Specifications; European Regulations - Philips SHG8100 Bedienungsanleitung

Transmitter
Receiver Unit

Technical specifications*

System:
Modulation:
Pilot Tone:
Carrier Frequency: (/00 & /05)
Radiated Output Power:
Effective Transmission Range:
Input Level:
Power supply:
Reception Frequency: (/00 & /05)
S/N ratio:
Distortion:
Channel Separation:
Audio frequency range:
Power Supply:
* All specifications are subject to change
** Depending on ambient conditions

European Regulations

Hereby, Philips Consumer Electronics, B.U. Peripherals & Accessories, declares
that this FM wireless headphone system SHG8100 is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
This product has been designed, tested an manufactured according to the
European R&TTE Directive 1999/5/EC.
Radio Frequency (RF)
Frequency Modulation (FM)
19kHz
Channel 1: 863.5MHz
Channel 2: 864MHz
Channel 3: 864.5MHz
<10mW
Up to 100m **, omni directional (360°)
500 mV
12 Volts/ 200mA DC, center positive;
type number: SBC CS030/00
(/05 for UK, Ireland)
863MHz – 865MHz
> 60dB (1kHz sine wave, A-weighted)
≤ 2% THD
≥ 30 dB
20-20,000 Hz
2 x AAA rechargeable battery
(Philips, NiMH, type number: SBC HB700)
ENGLISH
13