Inhaltsverzeichnis
Werbung
0912HP_EU 09-12-2003 12:12 Pagina 28
ENGLISH
28
Maintenance
• If the headphone will not be used for a longer time, please remove the
batteries to prevent leakage and corrosion.
• Hearing Safety! Continuous use at a high volume may permanently
damage your hearing.
• Do not leave the headphone near heat sources. Do not expose to
direct sunlight, excessive dust, moisture, rain or any kind of mechanical
shock.
• Do not use alcohol, thinner or petroleum-based substances to clean the
headphone or transmitter. Use a slightly dampened chamois cloth to
clean the housing.
• Do not use cleaning agents containing alcohol, spirits, ammonia or
abrasives as these may harm the housing.
Technical specifications*
Input sensitivity:
Power supply – base station:
Signal/Noise ratio:
HP 1000 Headphone
Distortion:
Sensitivity:
Frequency range:
Impedance:
Headphone cable:
Max. power input:
*) All specifications are subject to change without prior notice.
500 mVrms (1 kHz sine wave)
SBC HP 1500/00 & /05
230 VAC 50Hz
85 dB typical
(1 kHz sine wave, A-weighted)
0.8% THP typical
106 dB
40 – 40,000 Hz
32 Ohm
4.0 m (12 ft) LC OFC
1500 mW
Werbung
Inhaltsverzeichnis
