Configuration Menu - Silvercrest LT910 Bedienungsanleitung

SilverCrest LT 910
Press the EXIT button (34) to cancel the above process at any time.

Configuration Menu

The "Configuration" menu lets you adjust the display settings and language as
well as settings for picture and sound, your location and the time.
Display Time Display
setting
OSD Timeout
OSD
Transparency
Language
st
1
Language
English - 46
Audio
Select ON to display the current time while
watching TV. In order for the time to display
properly, you must set your location ("
"Configuration"
the time zone ("
"GMT Offset") as well as the daylight saving
time (" "
"Summer Time").
Use the direction buttons (25) to set how long the
on-screen messages (e.g. the channel name)
should remain visible. Select a value between 1
and 6 seconds.
Use the direction buttons (25) to set how
transparent the on-screen menus should appear.
You can choose a value from 0% (opaque) to
60%.
Use the direction buttons (25) and the OK button
(25) to set the desired language for the on-
screen messages.
Some TV shows and movies are broadcast with
several languages to choose from. You can set a
preferred audio language so you don't have to
select it each time again. If the audio language
you set under this function is not being
broadcast, the programme's default language will
be used.
"System Setup"
" "Configuration"
"Configuration"
"
"Area") and
"Time"
"Time"