Clear Exit Totalize; The Sample Is Weighed In Air; Specific Gravity - OHAUS Scout Pro Benutzerhandbuch

SCOUT PRO
Clear/Exit Totalize
Performing this next step will erase all totalized memory.
Y
3
Specific Gravity with Accessory Kit
Specific gravity is enabled only when SPEC.Gr is turned ON in the Mode submenu in
the .S.E.T.U.P. menu. The Specific Gravity mode allows calculating the specific
gravity of a sample. SPEC.GR mode must be turned ON before removing platform
and installing hook. Prepare the balance as shown. Remove the balance platform,
insert the hook and install the beaker stand. Beaker is not supplied.

The sample is weighed in air

suspended from the hook and then
weighed in water. The formula is
dry wt
dry wt - wet wt.
(See note)
(With print on, air weight is printed)
1
(With print on, wet weight is printed)
1
Beaker Stand
Top View
Specific Gravity Setups
1
Place weight on hook
Place weight in water
Specific Gravity Value
NOTE: "G" indicates a specific gravity value.
Specific Gravity has no unit of measure.
EN-21
Side View