Specifications - CO/Tech Q1D-TD-3.2-UK Original Bedienungsanleitung

Specific safety warnings for multi-tools
• This power tool is intended for sawing, sanding, polishing and cutting. Read all safety
warnings, instructions, illustrations, and specifications that are included with this tool.
Neglecting to follow all of the instructions listed below can result in electric shock,
fire and/or serious injury.
• Do not use accessories which are not intended to be used with this tool and which are
not recommended by the manufacturer. Even if the accessory can be attached to your
power tool, there is no guarantee that it can be used safely.
• Wear personal protective equipment. Depending on how you use the machine,
use face protection or safety glasses. If necessary use a mask, ear protection, gloves,
and work clothing, which protect against small debris or splinters from the work object.
Eye protection should protect against flying debris produced in different work phases.
The breathing protection should be able to filter particles, which are produced by
the work. Prolonged exposure to loud noise can result in hearing damage.
• Keep all bystanders at a distance. Everyone who visits the place of work must wear
personal protective equipment. Debris from the object worked upon or from a damaged
accessory can fly away and result in injury outside of the work's immediate vicinity.
• Only hold the power tool by its isolated grip when working in positions where the tool
might possibly cut through hidden cables or its own mains lead. Tool which come in
contact with an electric cable can electrify metal parts of the power tool and subject
the user to an electric shock.
• Regularly clean the motor's ventilation ports. The motor's fan pulls in dust, which gets
inside the outer casing and a build up of this collected metal dust can lead to electrical
dangers.
• Do not use the power tool near flammable material. Sparks can easily ignite
flammable material.
• Do not use accessories, which require liquid coolants. The use of water or other liquid
coolants can result in electric shock or electrocution.
Specific safety instructions for sanding
• Extra caution should be taken when sanding lead paint, wood, metal or other materials
which produce toxic dust. Make sure any bystanders in the work area are well protected.
• Remember that dust caused by sanding can be very flammable when mixed with air.

Specifications

Power supply 230 V AC, 50 Hz
10 000–21 000 min
Speed
Power 250 W
Weight 1.2 kg
Sound power (LwA)
-1
Sound pressure (LpA)
Vibration ah
6
97 dB(A) K: 3 dB(A)
86 dB(A) K: 3 dB(A)
6,60 m/s² K: 1.5 m/s²