Care And Maintenance; Troubleshooting Guide; Disposal - CO/Tech Q1D-TD-3.2-UK Original Bedienungsanleitung

Sanding
• Always use undamaged sandpaper and change it often. This will not only give you
better results but also prolong the life of your multi-tool.
• Do not use excessive force when sanding, apply a constant, light pressure. Applying
too much pressure will not speed up the sanding process; it will merely wear out
the sandpaper and the multi-tool more quickly.
• Do not use sandpaper that you have previously used for sanding metal to sand
wood with.

Care and maintenance

• Always keep the motor's ventilation openings free of dust and debris.
• Clean the machine regularly using a moist cloth and washing up liquid.
Avoid using strong detergents.

Troubleshooting guide

The machine does
not start.
The machine
runs slowly.
Strange noise.
Heavy vibration.
Sparks in
the motor.

Disposal

Follow local ordinances when disposing of this product.
If you are unsure of how to dispose of this product, please contact your municipality.
No power.
Worn brushes.
Short circuit.
Faulty power switch.
Worn/damaged accessory.
Speed too low.
The motor is overheated.
Mechanical fault.
Faulty windings.
Loose accessory.
Brushes jammed.
Winding short circuited.
Dirt on commutator.
Check the power point.
Contact us in case of motor or
electrical faults.
Sharpen or change the accessory.
Do not press down too hard.
Contact us in case of motor or
electrical faults.
Tighten the tool and make sure it is
set correctly.
Contact us in case of motor or
electrical faults.
10