Specifications; Technical Specifications - Pce Instruments Pce-Ct 90 Bedienungsanleitung

2

Specifications

2.1

Technical specifications

Specifications of the meter PCE-CT 90
Specification
Measurement range
Accuracy
Measurable materials
Min. radius of curvature
Calibration
Units
Power supply
Display
Operating conditions
Storage conditions
Dimensions
Weight
Specifications of the selectable probes
Specification Description
Measurement
Model
range
Fe-0.3* 0 ... 300 µm
0 ... 500 µm
Fe-0.5*
0 ... 2000 µm
Fe-2*
0 ... 5000 µm
Fe-5*
0 ... 2000 µm
NFe-2**
0 ... 12 mm
M12***
0 ... 30 mm
M30***
0 ... 60 mm
M60***
-50 ...+125°C
DT
Temperature:
-50 ...125 °C
Humidity:
DTVR
0 ... 100 %
Dew point:
-15 ...+40 °C
1 ... 300 µm
DSH
h is the nominal height of the coating or the depth of the grooves in mm (roughness).
* Fe: only for ferromagnetic substrates
** NFe: only for non-ferromagnetic substrates
*** Fe and NFe: for ferromagnetic and non-ferromagnetic substrates
Description
Depending on probe (see sensor chart)
Depending on probe (see sensor chart)
Magnetic materials (iron, steel...)
Non-magnetic materials (paint, plastics, ceramics, ...)
0.3 ... 50 mm (depending on probe)
Zero-point calibration, single-point calibration
µm, mm, °C
2 x 1.5 V AAA batteries (DC)
Graphic display
-10 ... +40 °C
20 ... 98 % RH, non-condensing at 35 °C
+5 ... +40 °C
80 % RH, non-condensing at 25 °C
136 mm x 75 mm x 32 mm
168 g
Accuracy
±(0.03xh+0.001) mm
±(0.03xh+0.001) mm
±(0.03xh+0.002) mm
±(0.03xh+0.002) mm
±(0.03xh+0.002) mm
±(0.03xh+0.001) mm
±(0.03xh+0.002) mm
±(0.03xh+0.003) mm
±1 °C
±1 °C
±5 %
±2 °C
±(0.03xh+0.002) mm
© PCE Instruments
13
Measurement description
Paints, lacquers, electroplating
Paints, lacquers, electroplating
Paints, lacquers
Lacquer coating, thick coating
Anodic oxide layers, lacquer layers
Thick coating
Thick coating
Thick coating
Surface temperature
Air temperature, air humidity, dew
point
Roughness