Child Protection - Koenic KWM 62212 A3 Gebrauchsanweisung

Child protection

Once the child protection is activated,
Fig.
10
the settings cannot be changed. The
washing machine can only be switched
off with the Ein/Aus switch, whereby
settings and wash progress are saved
and the washing process can be
continued after switching the machine
back on. The child protection can only
be activated if the washing machine
operation was started or is running
either directly or by time delay.
1. Activation: Press the STARTZEIT
VERZÖGERN and SCHLEUDERN
buttons at once for at least 3
seconds. The corresponding symbol
of the control panel indicates the
child protection
2. De-activation: Press the
STARTZEIT VERZÖGERN and
SCHLEUDERN buttons again at
once for at least 3 seconds. The
corresponding symbol of the control
panel turns off.
Disabling the alarm sound
To permanently deactivate the signal tone,
press the SCHLEUDERN button for at least
3 seconds while the washing machine is
switched on. To turn on the beep, press the
SCHLEUDERN button again for at least 3
seconds while the washing machine is on.
IM_KWM62212-A3_190523_V04_HR.indb 23
Cleaning and care
• When cleaning, never use solvents or
• Switch off the washing machine and let it
• Clean the exterior surfaces of the product
.
Fig.
Warning
abrasive materials, hard brushes, metallic
or sharp objects. Solvents are harmful to
human health and can attack plastic parts,
while abrasive cleaning mechanisms and
tools may scratch the surface(s).
cool down completely before cleaning.
with a slightly damp cloth and dry them
well. Make sure that no water enters the
product interior (e.g. at the switches).
Cleaning the detergent box
11
• Press the tab and lift up the
detergent box.
• Wash the chambers with water.
• If necessary, use a soft brush to
clean the housing.
• Insert the detergent box.
English
23
23/5/2019 10:58