Programming Options - Velleman HAA2850 Bedienungsanleitung

8.

Programming options

The default master code is 0000. Personalize this code as soon as
possible to increase system security.
First time entering programming mode.
Set user mode.
Set master and user codes for single user mode.
4 digits
4 digits
4 digits
Set master and user codes for multi user mode.
-
group 1
00 ~ 99
group 2
0 ~ 9
Configuring output modes
duration
1 ~ 999
-
-
duration
1 ~ 999
-
-
26.02.2010
Use the master code 0000 to enter programming mode for
the first time.
Set system to single-user mode, clear all previously stored
data and refresh (default). Note: wait ±3s until
confirmation beeps are heard before continuing.
Set system to multi-user mode, clear all previously stored
data and refresh. Note: wait ±3s until confirmation beeps
are heard before continuing.
master code
user code 1 for output 1 (with duress code function)
user code 2 for output 2
4~8 digits
4~8 digits
4~8 digits
output 1 in momentary mode from 1 to 999 seconds
(default: 401 = 1s)
output 1 in Start/Stop mode (toggle)
output 1 in Start/Stop mode (toggle) with accelerated
code
output 2 in momentary mode from 1 to 999 seconds
(default: 501 = 1s)
output 2 in Start/Stop mode (toggle)
output 2 in Start/Stop mode (toggle) with accelerated
code
HAA2850
master code
100 user codes in group 1 for output 1
(with duress code function)
10 user codes in group 2 for output 2
10
Rev. 03
©Velleman nv