Trouble Shooting; Technical Specification - OK. OFR10011A1 Bedienungsanleitung

12 Trouble shooting

Defect
1. Interior lights are not
working, but compressor is
running.
2. There is water in the
appliance.
3. The cooling group starts
too often and too long.
4. The appliance does not
cool.
WARNING
Repairs to electrical appliances may be carried out only by a qualified
technician. Repairs that are wrong or not correctly performed can cause
hazard to the user and lead to a loss of warranty.

13 Technical specification

Model
Type
(Number of temperature control)
Defrost Cooling
Electrical connection [V/Hz]
Rated power [A]
Net weight [kg]
EAN no. [white]
Dimensions and required space, see chapter ‚Installation'"
*subject to change without prior notice*.
OFR 10011 A1
EN
Possible causes
The light bulb is
defective.
The water drainage
channel is blocked.
- You have opended the
door too often.
- The air circulation
around the appliance is
obstructed.
- The appliance is off or
not supplied with power.
-Temperature control is
regulated on "0"
- Ambient temperature is
too low.
Version OK1.0 04/2015
Measures
Replace light bulb (see chapter
11).
Clean the water drainage
channel and the drain pipe.
- Don't open the door
unnecessarily.
- Keep free the surroundings of
the appliance.
- Check, whether power supply
works, fuses are intact, mains
plug is correctly plugged into
the socket.
- Adjust the temperature
control.
- See chapter 6.2
OFR 10011 A1
1
Auto
220-240 / 50
0.4
14
4049011123410
page 19 of 21