Intended Use; Prior To Initial Operation - OK. OFR10011A1 Bedienungsanleitung

Procedure for damaged refrigerant circuit:
 Imperatively avoid open flames and sources of ignition
 Ventilate well the room in which the appliance stands.
3

Intended use

This appliance is intended to be used in household. It is suitable for cooling food and
beverages only.
The manufacturer is not reliable for any damage resulting from commercial or any
other use then cooling food/beverages.
For safety reasons alterations and modifications are not allowed for this appliance.
This appliance is not designed for built-in nor built-under!
WARNING
Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type
recommended by the manufacturer.
CAUTION
Plastic parts in contact for longer periods or frequently with oil/acids
(animal or plant), age faster and may tear or break.
CAUTION
The appliance is not suitable for the storage and cooling of medicine,
blood plasma, laboratory preparations, or similar products according to
Medical Device Directive 2007/47/EC.
4

Prior to initial operation

The packaging must be intact. Check the appliance for any transport damage. Do not
install a damaged appliance. In case of damage, please contact your supplier.
Remove transport protection
The appliance and parts of the interior are protected for transportation. Remove all
adhesive tapes from the right and left side of the door and the expanded polystyrene
parts from the rear (grid / depending on the model). You may remove any adhesive
residue with a cleaning solvent. Also remove any adhesive tapes and packing material
from inside of the appliance.
OFR 10011 A1
EN
Version OK1.0 04/2015 page 7 of 21