Use Of The Control Panel - Respekta 9040 Bedienungsanleitung

The sensors 2 and 4 should be deactivated to set the timer.
1. Touch sensor 1 for 2-5 seconds and the first two numbers on the
display flash.
2. Touch sensor 4 to increase the numerical value.
3. Touch sensor 2 to decrease the numerical value.
4. Each touch represents the numerical value 01. The highest value is 23. Sensor 4
cannot work when this value is exceeded. Sensor 2 cannot work when the numerical
value is 00.
5. Touch sensor 1 a second time and the last two numbers on the
display flash.
6. Touch sensor 4 to increase the numerical value.
7. Touch sensor 2 to decrease the numerical value.
8. Each touch represents the numerical value 01. The highest value is 59. Sensor 4
cannot work when this value is exceeded. Sensor 2 cannot work when the numerical

Use of the control panel

Touch to set the time / timer
Touch to switch on/off the light as well as to set the
time / timer.
Touch to choose a power level from 1-3.
Touch to set the time / timer.
Switches the appliance on/off.
Setting of the timer
47