Lamax Drive C7 Car Camera General Settings; Key Tones; Auto Power Off; Date/Time - Lamax Electronics Drive C7 Handbuch

LAMAX DRIVE C7 car camera general settings

1) Key tones

enables or disables key tones.

2) Auto power off

allows you to set auto power off after 1 or 5 minutes.

3) Date/Time

sets the date and time on the device. Date format can also be chosen.

4) Date format

sets the format of the displayed date (year/month/day, month/day/year, day/month/year) or turns it off
completely.

5) Display location

allows you to display the GPs coordinates on the video. Works only when GPs module is connected correctly.

6) Display speed

Displays actual movement speed on screen and on the video. Works only when GPs module is connected correctly.

7) Display GPS

should be enabled for the proper functioning of the camera with the GPs module. The GPs icon appears on the
display and the speed (when enabled) is shown in km/h.

8) Refresh rate

sets the frequency in accordance with the grid frequency (on the european continent the frequency is 50 Hz, in
the americas and parts of asia it is 60 Hz).

9) USB

sets how the camera behaves when connected to a PC. Can be connected as a webcam (PC Cam) or plug ‚n' play
(msDC) device.

10) Rotate display

allows you to rotate the screen 180°. Handy when mounting the camera on the dashboard.

11) Screensaver

sets the display to auto power off when idle for 3, 5 or 10 minutes.

12) G-sensor level

Connected to other functions of the car camera. Can be set at three different levels of sensitivity (high, medium
and low). setting the proper sensitivity affects the functionality of the camera's other features. For the proper
functioning of "parking mode" we recommend a higher sensitivity for capturing minor collisions (when parking,
vandalism). For the proper functioning of the file locking feature we recommend a lower sensitivity to prevent
unwanted locking, for example, when on rough terrain. The g-sensor icon can be seen on the left of the display.

13) Motion detection

When motion detection is enabled, the camera begins recording the moment movement is detected in the lens
field of view. Camera stops recording after motion ceases.

14) GPS status

Information about the GPs connection.

15) Choose time zone

select the time zone where you are.

16) Restore factory settings

restores all settings back to their original state.

17) Format SD card

Formats the microsDHC card.
- 6 -