Safety Measures; Precautions And Notices; Safety Precautions; Caring For Your Device - Lamax Electronics Drive C7 Handbuch

Safety measures

1. Do not drop camera or subject it to physical shocks or anything which may lead to mechanical damage.
2. Do no place the camera near objects with a strong magnetic field, such as magnets or electric motors. Do not
place the camera too close to buildings emitting strong radio waves such as antennas. strong magnetic fields
and radio waves can cause damage to the camera or damage to the captured images and audio recordings.
3. Do no expose the camera to high temperatures or direct sunlight.
4. Use only microsDHC cards from reputable brands. Cards from generic manufacturers do not guarantee proper
data storage functioning.
5. Do no place the microsDHC card near a magnetic field or a source of static electricity. This will prevent the loss
of stored data.
6. In the event that the device overheats whilst charging, gives off smoke or a suspicious odour, unplug the device
immediately and stop charging.
7. Whilst charging, keep the device out of reach of children. Power cable can cause electric shock or asphyxiation
to a child.
8. store in a cool, dry and dust-free environment.

Precautions and notices

– For your own safety, do not use the camera's controls while driving.
– a window mount is needed when using the recorder in a car. make sure that you place the recorder in an appro-
priate place, so as not to obstruct the driver's view or deployment of airbags.
– make sure that no object is blocking the camera lens and no reflective material is placed near the lens. Please
keep the lens clean.
– If the car's windshield is tinted or coated, it may impact the recording quality.

Safety precautions

– Use only the charger supplied with your device. Use of another type of charger may result in malfunction and/
or danger.
– Do not use the charger in high moister environment. never touch the charger when your hands or feet are wet.
– allow adequate ventilation around the charger when using it to operate the device or to charge the battery.
Do not cover the charger with paper or other objects that will reduce cooling. Do not use the charger while it
is inside a carrying case.
– Connect the charger to a proper power source. The voltage requirements are found on the product case and/
or on the packaging.
– Do not use the charger if it is visibly damaged. In case of damage, do not repair the equipment yourself!
– In case of device overheating, immediately disconnect the power source.
– Charge the device under supervision only.

Caring for your device

– Taking good care of your device will ensure trouble-free operation and reduce the risk of damage.
– Keep your device away from excessive moisture and extreme temperatures and avoid exposing your device to
direct sunlight or strong ultraviolet light for extended periods of time.
– Do not drop your device or subject it to severe shock.
– Do not subject your device to sudden and severe temperature changes. This could cause moisture condensa-
tion inside the unit, which could damage your device. In the event of moisture condensation, allow the device
to dry out completely before use.
– The screen surface can easily be scratched. avoid touching it with sharp objects.
– never clean your device when it is powered on. Use a soft, lint-free cloth to wipe the screen and the exterior of
your device. Do not use paper towels to clean the screen.
– never attempt to disassemble, repair or make any modifications to your device. Disassembly, modification or
any attempt at repair could cause damage to your device and even bodily injury or property damage and will
void any warranty.
- 8 -