Code Auswahl - Datalogic Gryphon D432 Handbuch

CODE AUSWAHL

Übertragungsmode bei identischem Inhalt = ein
Standard Code 39: no check digit control, variable code length;
EAN 8/EAN 13 / UPC A/UPC E without ADD ON: UPCE expansion disabled
Interleaved 2/5: check digit control and transmission, variable code length
Code 128: variable code length
PDF417
Datamatrix: rectangular, normal and inverted, variable code length
QR
Code 32, Codabar, Code 93, EAN 128, RSS, Micro PDF417, Postal Codes,
Maxicode, Composite Codes.
LESE RARAMETERREADING PARAMETERS
trigger type normal, trigger level mode, flash on = 2 sec, flash off = 2 sec,
beeper tone = tone 1, beeper volume = high, beeper duration = 50 ms, user
defined beeper = tone 1, user defined beeper volume = high, user defined
beeper duration = 100 ms, code per scan = one code per scan, read per
cycle = one read per cycle, scan timeout = 5 sec, central code transmission
enabled, order by code length disabled, order by code symbology disabled,
autoscan mode disabled, autoscan aiming system enabled, autoscan
hardware trigger enabled, autoscan illumination system disabled, stand
autoscan mode = normal, aiming system delay = disabled, good read spot =
disabled, safety time = 500 ms
IMAGE FORMATTING ( Bildformatierung )
Image Preset 1, 2, 3, 4
image format = JPEG, resolution = full (640 x 480), set JPEG quality
factor = 50, window origin = (0, 0), window dimensions = (640 x 480),
brightness = 0%, contrast = 0%, zoom = 100%, color depth = 256 gray level.
Aktivierte Codes
Deaktivierte Codes
GRYPHON™ D432/D432E
13