Conceptronic CM3GD Benutzerhandbuch Seite 71

ENGLISH
The unit can be connected to your computer to copy data (movies, music, pictures, records, etc.) from and
to the internal HDD.
Note: In our example below, we are using a computer running Windows XP, but the unit can be used on
computers with USB support and the capability of reading & writing FAT32 & NTFS file systems.
Connect the unit to your computer
• Connect the delivered USB to Mini-USB cable to the Mini-USB port on the frontside of the unit and to a
free USB port on your computer.
• Turn the unit on with the main power switch on the backside of the unit. The unit will be recognized
and installed automatically and will be shown as extra drives on your computer.
Note: When the harddisk is partitioned with 1 media partition (FAT32 only), there will be only 1 drive
letter visible. When the harddisk is partitioned with 2 media partitions (FAT32 and NTFS), the
Media Giant will show 2 drive letters.
Recording playback on your computer
To play your recordings on your computer, you first need to copy the recordings from the record partition
to the media partition. You can do this with the 'Copy to FAT32 Partition' command, which can be found
in the 'Playback Recordings' menu, explained in chapter 10.
When your recordings are copied to the FAT32 partition, you can play the recorded programs on your
computer, when the unit is connected to the computer.
Disconnect the unit from your computer
• Single-click the "Safe Removal" icon on the system tray.
• Select "Stop USB Mass Storage Device" when prompted.
• Wait for the message "Safe to remove Hardware".
• Disconnect the USB cable.
14. Computer USB Connectivity
71