Attach The Control Module To Your Radio/Belt Pack; Connect The Control Module - Bose SOUNDCOMM B40 Handbuch

H OW TO W E A R THE CON T R O L M O D U L E (O P TI O N A L )
ATTACH THE CONTROL MODULE TO YOUR
RADIO/BELT PACK
1. Align the dual lock tab on the control module with the dual lock tab on the
belt pack bracket.
2. Press firmly until you hear a click.

CONNECT THE CONTROL MODULE

1. Align the XLR connector with the pins on your radio/belt pack connector.
2. Press firmly until you hear a click.
NOTE: The headset can also connect to a camera using the XLR connector. Refer to
your camera owner's guide for connection instructions.
Dual lock tabs
Control Belt pack
module intercom
|
1 4 E N G
XLR connector