Introduction; Structure Of The Mesh Base; Technical Specifications - Auping Automat 333 Gebrauchsanweisung

1. Introduction

You have chosen a Match mesh base, tailored
to meet your individual requirements. The
ways in which the mesh bases can be adjust-
ed differ per type. The mattresses differ in
their use of materials and their functions.
All Auping mattresses are suitable for the
adjustable Match mesh bases. The mattress is
adapted to the weight distribution of the body
by means of comfort zones. The shoulder
zone is somewhat more pliable, while the sit-
ting area has been extra strengthened. This
zoning gives extra comfort and better support
for both sitting and lying on the mattress.
Thanks to its smooth fibres, the underside of
the mattress glides over the back section of
the mesh base during adjustment.
The mattress is fastened to the mesh base
with mattress connectors. Thus, the mattress
cannot slide down while adjusting the bed and
it will exactly follow the movements of the
mesh base.
The mattresses are constructed asymmetri-
cally from various materials and therefore do
not need to be turned.
The components of Auping Match can be used
together in any combination. In addition, the
mesh base can be combined with various sur-
rounds, headboards, cupboards and acces-
sories.
GB2
_007ZB_3151 BW.pdf - pag.12

1.1 Structure of the mesh base

Automat
Type 333
Manually adjustable foot end
2. Back section adjusted with a gas spring
3. Rubber ball on gas spring control cord
4. Legs

1.2 Technical specifications

Weight (example)
- Match 333, dimensions 90 x 200: 38 KG
LET OP !!! Lage resolutie!
1.
fig. 1
November 19, 2007