Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7
Troubleshooting
Some of the most frequent defects and their causes are listed in the following chart. In case of other defects,
contact your dealer or the Mafell customer service.
Defect
Machine cannot be switched on
Machine switches itself off when
idling or while cutting is in
progress
Unsatisfactory finish
Chip ejection blocked
8
Optional accessories
- Dust bag, cpl.
- Reversible blades (1 pair)
- Reversible blades (3 pairs)
9
Exploded drawing and spare parts list
The corresponding information in respect of spare parts can be found on our homepage: www.mafell.com
Danger
Determining the causes for existing defects and eliminating these always requires
increased attention and caution. Pull the mains plug beforehand!
Cause
No mains voltage
Carbon brushes worn
Mains failure
Blunt knives
Uneven feed
Wood is too damp
Extended
extraction
operation
without
-18-
Elimination
Check power supply
Take the machine to a MAFELL
customer service agency
Check mains backup fuse
Reverse or replace knives
Cut with constant pressure and
reduced feedrate
Connect to an external extractor,
e.g. portable dust extractor
Ref. No. 033707
Ref. No. 091696
Ref. No. 091697
Werbung
Kapitel
Inhaltsverzeichnis
