Wiring Layout - Hendi 225707 Gebrauchsanweisung

Replacing oven lamp
- Electrically switch off the appliance.
- Unscrew the protective cap in glass (Fig. 15);
- Unscrew the lamp and replace it with another
lamp suitable for high temperatures (300°C)
- Refit the glass cap and power up the appliance.
IMPORTANT - At least once a year, arrange for a qualified technician to inspect the
appliances, with special reference to gas and electrical connections. The manufac-
turer declines any liability for direct or indirect damage caused by incorrect use,
poor installation, maintenance or anything else specified in our sales conditions.

WIRING LAYOUT

with the following characteristics:
Voltage: 230/240 V
Power: 15 W
Fitting: E 14
EN
15