Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Manual Programme Preset The "Manual Programme Preset" option (A–E) allows you to:
A)
Preset channels, one by one, in the programme order of your choice.
To do this:
1
After selecting this option, press OK.
2
Highlight the Programme option and press OK.
3
Press
or
to select a programme number for which you want to preset the
channel, then press
. If you do not want to preset other options for the channel,
press OK instead of
and go to step 8.
4
After selecting the System option, press OK.
Depending on the country/region you have selected in the "Country" option,
this option may not be available (see page 29).
5
Press
or
to select the TV Broadcast system (B/G for western European
countries/regions, D/K for eastern European countries/regions, I for the United
Kingdom, or L for France), then press
for the channel, press OK instead of
6
After selecting the Channel option, press OK.
7
Press
or
to select the type of channel to be tuned (S for cable channels or C
for terrestrial channels), then press
After that, press the number buttons to enter the channel number of the TV
Broadcast directly. If you do not know the channel number, press
search for it.
When you have tuned the desired channel, press OK.
8
Highlight the Confirm option and press OK. Then press
finally press OK to store your channel selection.
Repeat all the above steps to tune and store other channels.
B)
Label a channel using up to five characters (letters or numbers).
To do this:
1
Press PROG +/– to select the programme number with the channel you want to
name.
You cannot select the programme number set to skip in the "Skip" option
(see step D on page 32).
2
When the programme you want to name appears on the screen, select the Label
option and press OK.
3
Press
/
/
or
to select the first character, then press OK.
4
When you have finished, press
screen and press OK to exit the character input screen.
5
Highlight the Confirm option and press OK. Then press
finally press OK to store your choice.
• If you input a wrong character, select the character using
Then press
/
/
or
• For a blank, select
on the screen and press OK.
. If you do not want to preset other options
and go to step 8.
.
/
/
or
to select the word "End" on the
to select the correct character and press OK.
GB
or
to
to select OK and
to select OK and
or
on the screen.
(continued)
31
Menu System
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
