Sony Wega KE-P37M1 Bedienungsanleitung Seite 22

6
The TV starts searching and storing all available broadcast
channels.
• This procedure could take some minutes. Please be
patient and do not press any buttons, otherwise the auto
tuning will not be completed properly.
• If no channels are found during the auto tuning process,
a new menu appears automatically on the screen asking
you to connect the aerial. Please connect the aerial (see
page 16) and press OK. The auto tuning process will
start again.
7
When the auto tuning is finished, the Programme Sorting
menu appears automatically on the screen.
A)
If you want to keep the broadcast channels in the tuned
order, go to step 8.
B)
If you want to store the broadcast channels in a different
order:
1 Press or
with the channel you want to rearrange, then press
.
2 Press or
number position for your selected channel, then press
.
The selected channel now moves to its new
programme position and the other channels
move accordingly.
3 Repeat steps 1 and 2 if you want to change the order
of the other channels.
8
Press MENU to turn off the menu.
Your TV is now ready for use.
20
First Time Operation
to select the programme number
to select the new programme
Auto Tuning
Programme : 01
System : I
Channel : C23
Searching...
No channel found.
Please connect aerial
Confirm
Programme Sorting
Select Channel
01 TVE
02 TVE2
03 TV3
04 C33
05 C27
06 C58
07 S02
08 S06
09 S08
10 S12
11 S14
Exit:
MENU
Programme Sorting
Select new position
01 TVE
02 TVE2
03 TV3
04 C33 01 TVE
05 C27
06 C58
07 S02
08 S06
09 S08
10 S12
11 S14
Exit:
MENU