Lanaform New Vapolux Bedienungsanleitung Seite 6

•
PRODUCT COMPONENTS, 1, 2
1
2
3
4
5
6
DEVICE DISPLAY, 2, 3
1
2
3
4
5
6
7
8
9
INSTRUCTIONS FOR USE
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
6 / 64
New Vapolux - LA120119 - 003 - 2017 - Notice - K.indd 6
EN
FR NL DE ES IT PL CS SK HU SL HR RU BG SV AR
The New Vapolux humidifier is designed for indoor
and domestic use only.
Diffuser sprinkler tip
Water reservoir
Base of the device
Control panel and display screen
Demineralisation cartridge (filter)
Water reservoir lid
"ON/OFF" button
Button for producing negative ions
Button for adjusting level of emission intensity
Button for adjusting relative humidity level
Button for adjusting timer
Negative ion production display
Button for adjusting relative humidity level
Timer display
Level of emission intensity display
Cool mist humidifier
LCD screen
Automatic detection and display of ambient rel-
ative humidity
Capacity for programming desired humidity level
Timer: 12 hours with programming in 1-hour stages
3 levels of vapour emission intensity:
low, medium, high
Negative ion production
Remote control
Capacity of water reservoir 4.5L
Maximum flow rate of cool mist: 400ml/hour
+ 11 hours of continuous diffusion at 400ml/hour
Automatic shutoff device when the water res-
ervoir is empty
Automatic shutoff device when the water reser-
voir is lifted up
Quiet operation (≤35dB)
New Vapolux EN Instruction manual
Features
• Air humidifier
• Eliminates electrostatic charges
• Improves ambient air quality
Fitting the demineralisation filter
Attach the demineralisation filter to the inner wall
of the reservoir lid by turning it clockwise as shown
in Figure 3, item (h). Conversely, to remove the dem-
ineralisation filter, turn it anticlockwise.
Instructions, 3, 4
1 Place the New Vapolux humidifier in the
room half an hour before turning it on so
that it can adjust to room temperature.
2 Make sure it is always placed on a hard,
flat and horizontal surface, items (a) (b).
Always keep it away from walls and heat
sources such as stoves, radiators, etc.
3 Make sure the device is clean
before starting to use it.
4 Remove the reservoir using its handle, item
(c, d) and keep it upside down, item (e). Turn
the reservoir lid in an anti-clockwise direction
to open it, items (f) (g). Then pour clean and
fresh, distilled or demineralised water into the
reservoir. Replace the lid and turn clockwise to
close it tightly, items (g) (f).
Finally, fit the reservoir correctly on to the
base of the device, items (e, d, c) (b, a).
5 Make sure your hands are completely dry
when connecting and disconnecting the
device and if they are not, then dry them.
6 The humidifier is now working.
The control panel of the device (item 4, Figure
is identical to the remote control (see Figure 2).
7 Press the "ON/OFF" button to switch on the
device (item 1, Figure 2). Once the device is
activated, you will be able to programme the
various functions of the device as required.
To do this, press buttons:
• "Ion" to produce negative ions in order to neutral-
ise the electrostatic charges (item 2, Figure 2).
• "Max/Min" for adjusting the level of vapour emis-
sion intensity (item 3, Figure 2).
• "Humidity" for adjusting the level of relative hu-
midity in the room in which the device is placed
(item 4, Figure 2). If you do not press this button,
02/06/2017 14:27:18