Abus eyseo TV7230 Installationsanleitung Seite 71

Preface
Dear Customer,
Thank you for purchasing this Pan/Tilt Network Camera of the Eyseo series of ABUS Security-Center. You
made the right decision in choosing this state-of-the-art technology,
which complies with the current standards of domestic and European regulations. The CE has been proven
and all related certifications are available from the manufacturer upon request.
To maintain this status and to guarantee safe operation, it is your obligation to observe these operating
instructions! In the event of questions, please contact your local specialist dealer.
This PAN/TILT network camera is used for object surveillance. The recorded video signals are transmitted to
a computer digitally via the connected network. The computer software permits simultaneous recording of up
to 16 connected video signals. Data storage is subject to local national data-protection guidelines. Via the
Internet Explorer, you have worldwide access to installed cameras (password-protected).
Precautions
The PAN/TILT network camera and connected components must be kept free of moisture (cellars and similar
surroundings are to be strictly avoided). Use of this product for other than the described purpose may lead to
damage of the product. Other hazards such as short-circuiting, fire, electric shock, etc., are also possible.
The equipment is designed for operation using a Class 2 12V DC transformer. No part of the product may be
changed or modified in any way. Connection to the public power network is subject to country-specific
regulations. Please be aware of applicable regulations in advance.
To avoid fire and injury, please observe the
following:
Securely fasten the device at a dry location in
the building.
Ensure sufficient air circulation.
Do not expose the device to temperatures less
than 0°C or more than 35°C.
The device is designed for indoor use only.
Humidity must not exceed 90% (non-
condensed).
Ensure that the voltage is disconnected when
performing work on the device.
General:
Improper or careless installation work may lead to faults and poor image quality. Therefore please read the
instructions very carefully and follow the installation instructions for lines and components precisely.
The manufacturer reserves the right to make technical modifications at any time.
Please observe the following regulations to
ensure trouble-free operation of your
device.
The PAN/TILT network camera is supplied by a
12VDC transformer.
The transformer should be connected to the
230VAC building mains by means of a
separate, electrically protected line.
Connection work to the building mains is
subject to country-specific regulations
2