Adjustment - Holzmann SB4115H Originalbetriebsanleitung

14.2

Adjustment

MT2 arbor and drill chuck need to be clean.
Plunge the chuck jaws of the drill chuck entirely.
Connect the arbour and drill chuck with care!
Fix it by softly knocking on it with a wooden or rubber hammer (never use a metal hammer).
HOLZMANN MASCHINEN Austria
Now insert the combo into the spindle and twist until it
clicks.
Fix it by softly knocking on it with a wooden or rubber
hammer.
www.holzmann-maschinen.at
STÄNDERBOHRMASCHINE / DRILL PRESS
OPERATION
You can remove
the combo with
the
shank puller.
SB4115H/SB4115N/SB4116HM/SB4116HN
morse
Seite 36