Assembly; Preparatory Activities; Delivery Content; Workplace Requirements - Holzmann SB4115H Originalbetriebsanleitung

13

ASSEMBLY

13.1

Preparatory activities

13.1.1 Delivery content

Please check the product contents (see capture
11.1) immediately after receipt for any eventual
transport damage or missing parts. Claims from
transport damage or missing parts must be
placed immediately after initial machine receipt
and unpacking before putting the machine into
operation. Please understand that later claims
cannot be accepted anymore.

13.1.2 Workplace requirements

The workplace has to fulfill the requirements
stated in capture 12.
The ground has to be even, in level and hard. It must be suitable at least to weight it with double
weight per square meter than the machines net weight.
The chosen workplace must have access to a suitable electric supply net hat complies with the
machines requirements.

13.1.3 Transport

The machine can be transported in package with a forklift.
The machine is very heavy. The machine shall be lifted from crate with a suitable lifting device
only that is certified to be able to carry the machines load.
Note that lifting equipment used (crane, forklift, sling, etc.) must be in perfect condition.
To maneuver the machine in the packaging can also a pallet jack or a forklift be used.

13.1.4 Preperation of the surface

Uncoated metal machine parts have been insulated with a greasy layer to inhibit corrosion.
This layer has to be removed. You can use standard solvents that do not damage the machine
surface.
Do not use solvents based on nitrite, aggressive solvents like break
cleaners or scrubbing agents!
These damage the machine surface.
HOLZMANN MASCHINEN Austria
The lifting and transportation of the machine must only be
carried out by qualified staff and must be carried out with
appropriate equipment.
www.holzmann-maschinen.at
STÄNDERBOHRMASCHINE / DRILL PRESS
W A R N I N G
N O T I C E
SB4115H/SB4115N/SB4116HM/SB4116HN
ASSEMBLY
Seite 32