Emergency Procedure - Holzmann SB4115H Originalbetriebsanleitung

HOLZMANN MASCHINEN Austria
 Never leave the machine running unattended! Before leaving
the working area switch the machine off and wait until the
machine stops.
 Always disconnect the machine prior to any actions
performed at the machine.
 Avoid unintentional starting
 Do not use the machine with damaged switch

 The plug of an electrical tool must strictly correspond to the
socket. Do not use any adapters together with earthed electric
tools
 Each time you work with an electrically operated machine, caution
is advised! There is a risk of electric shock, fire, cutting injury;
 Protect the machine from dampness (causing a short circuit)
 Use power tools and machines never in the vicinity of flammable
liquids and gases (danger of explosion)
 Check the cable regularly for damage
 When working with the machine outdoors, use extension cables
suitable for outoor use
 Do not use the cable to carry the machine or to fix the work piece
 Protect the cable from heat, oil and sharp edges

Avoid body contact with earthed
 Before starting the machine remove any adjusting wrenches and
screwdrivers
 Use a clip or clamping jaws to secure the workpiece
 Do not fix the workpice with your hands
 Rotating parts can cause severe cut injuries
 Keep the drills sharp and clean, so they get stuck less often and
are easier to guide
 Keep any machine that is not being used out of reach of children
A first aid kit in accordance with DIN 13164 should always be readily
available for a possible accident. Initiate the violation in accordance with
the necessary first aid measures. When requesting support, provide the
following details:
1. Place of accident
3. Number of injured persons
www.holzmann-maschinen.at
STÄNDERBOHRMASCHINE / DRILL PRESS
N O T I C E

Emergency procedure

2. Type of accident
4. Injury type(s)
SB4115H/SB4115N/SB4116HM/SB4116HN
SAFETY
Seite 30