Squelch; Time-Out-Timer (Tot) - Radioddity GA-2S Benutzerhandbuch

Visit Radioddity.com For Downloads And Help

8. Squelch

The squelch level will determine the signal strength at which the radio speaker is
turned on. If the squelch level is low, the background noise of the radio speakers will
be higher, the corresponding communication range will be further, but the anti-in-
terference ability will be weaker.
The default setting of squelch level is 5. You can adjust it through the menu
"Squelch Level" in the software from level 0 to 9, and 0 is the lowest level.
Visit Radioddity.com For Downloads And Help
18

9. Time-Out-Timer (TOT)

This feature provides a safety switch that limits transmission time to a programmed
value. This will promote battery conservation by not allowing you to make exces-
sively long transmissions, and in the event of a stuck PTT switch it can prevent
interference to other users as well as battery depletion. If the transmitting time
exceeds the TOT pre-set time, a beep will be heard and the radio will stop transmit-
ting.
19