Specifications - Panasonic AW-RC600E Bedienungsanleitung

Specifications

Power supply:
220 to 240 V AC, 50 Hz
Power consumption: Approx. 67 W
indicates safety information.
Video output:
Genlock input:
AUX input:
Pan/tilt head control input:
Switch function:
Adjustment function:
TALLY/INCOM connector:
INCOM connector:
Maximum cable length:
Operating temperature:
Dimensions (WHD):
Weight:
Finish:
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
Composite signal 1.0 Vp-p/752 (BNC connector)
R/G/B, Y/PR/PB, Y/C signal (switch)1 each (BNC connector)
R,B: 0.7 Vp-p/75, G: 1.0 Vp-p/75 (with SYNC)
Y: 1.0 Vp-p/75, PR, PB: 0.525 Vp-p/75
Y: 1.0 Vp-p/75, C: 0.3 Vp-p/75
SYNC signal (Negative polarity) 2 Vp-p/751 (BNC connector)
S-Video signal Y: 1.0 Vp-p/75, C: 0.3 Vp-p/75 (S-Video connector)
 The above values are the values which are cable-compensated by this unit after they has
been output from the camera at a regular level.
1.0 Vp-p composite video signal or black burst signal/75 or High impedance (automatic
terminated BNC connector)
1.0 Vp-p composite video signal/75 or High impedance (automatic terminated BNC connector)
Pan/tilt head (up, down, right, left, defroster, wiper), lens (zoom, focus)
D-SUB 15-pin (female)
Gain up selection, AGC selection, colour bar/camera selection, detail compensation selection,
auto white/auto black set, white balance selection, scene file, electronic shutter switch,
lens iris selection, subcarrier phase coarse adjustment, cable compensator selection, user set,
menu, item up, item down
R•B gain, R•B pedestal, total pedestal, lens iris adjustment, INCOM level, horizontal phase,
subcarrier phase finely adjustment, Y gain adjustment, chroma gain adjustment
D-SUB 15-pin (female)
XLR 4-pin (male)
300 m (convertible camera unit)
100 m (AW-E860 + AW-PB305 + Viewfinder)
–10°C to +45°C
42088250 mm (excluding protrusions)
Approx. 5.6 kg
AV ivory paint (colour resembling Munsell 7.9Y 6.8/0.8)
20 (E)