Installation Steps; Package Contents; Optional Accessories - Axis Q8414–LVS Installationsanleitung

Installation Guide
This Installation Guide provides instructions for installing AXIS Q8414–LVS Network Camera on your
network. For other aspects of using the product, see the User Manual available at www.axis.com

Installation Steps

1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 9.
2. Study the hardware overview. See page 10.
3. Study the specifications. See page 13.
4. Install the hardware. See page 16.
5. Access the product. See page 25.

Package Contents

• AXIS Q8414–LVS Network Camera
• Washers (for mounting screws)
• AXIS Connector Guard A
• Installation and Management Software CD
• Torx bit TR20
• 4–pin terminal connector
• Printed materials
- Installation Guide (this document)
- AVHS Authentication key

Optional Accessories

• AXIS T8642 Mounting Kit A (for installing a PoE Ethernet over Coax Adaptor inside
the camera). See page 22.
• AXIS Door Switch A (for intrusion detection). See page 23.
• AXIS Q8414-LVS Smoked Dome (5 pcs). See page 24.
• AXIS Q8414-LVS IR Window B (solid window without microphone hole; 5 pcs). See
page 24.
• I/O Audio Cable 5m (16 ft.)
For information about available accessories, see www.axis.com
AXIS Q8414–LVS Network Camera
9