Setting Boot Screen Callsign; System Menu - XIEGU G90 Benutzerhandbuch

Setting Boot Screen Callsign

The G90 can display your call sign on the boot-up screen
Operation method:
1. Press and hold the [VM] button to enter the text editor.
2. At the bottom of the screen is the character selection area. Rotate the main
knob to select the desired character. Short press the main knob inwards to
select the character.
3. Press the button corresponding to BACK to delete the last character; press the
button corresponding to QUIT to exit the editor interface; press the button
corresponding to SAVE to save and exit the editor interface.
4. When you turn it on again, the edited text information will be displayed on
the screen.
The relationship between functions and buttons:
SAVE: Corresponding to the [PRE] button
BACK: Corresponding to the [NB] button
QUIT: Corresponds to the [VM] button
28
Press and hold the [FUNC] button to enter the system menu.
The various menu functions are defined as follows:
Menu name
Serial number
1 Mic up/down
2 Handle F1
3 Handle F2
4 LCD BL
5 AUX IN Volume
6 AUX OUT Volume
Version
7

System Menu

Function Description
Hand mic up/down button function setting
Hand mic F1 button function setting
Hand mic F2 button function setting
Screen backlight brightness setting
ACC port input audio volume setting
ACC port output audio volume setting
Current firmware version number
29