Multi-function Adjustment Knob
The multi-function knob controls many of the radios functions and settings
Multi-function Adjustment Knob
Operation method:
Default: VFO tuning in 100 kHz frequency increments.
Short press: Enter SQL item to adjust SQL level.
Hold press: Goes to the User Custom feature menu.
Rotate the main knob to select the appropriate item.
Short press the "SAVE" key to select that menu item.
At this point, the featured item is adjusted by the multi-function adjustment knob.
The Save and Exit buttons are the first two under the LCD.
Save = PRE Exit = COMP
The customizable features are as follows:
1) Frequency steps
2) SQL Level
3) Po Level, transmit power setting
4) Key Speed, automatic key rate setting
5) FFT Scale-spectrum reference level setting
16
Adjusting Transmit Power
Operation method:
1. Short press the [Po] button to set.
2. Then use the multi-function knob to set the output power in 1W increments.
Multi-function Adjustment Knob
When using the G90 transceiver for the first time without knowing for sure your antenna has
a low SWR, minimize the set transmit power output.
17
PO