Lcd Display; Power On/Off; Bands Selection - XIEGU G90 Benutzerhandbuch

LCD Display

Many of the G90's buttons have dual functions. Main functions are accessed by a
short press and alternate functions are accessed by a long-press of the control
button. All the functions states and values are reported through the 1.8" color
LCD screen.
Interface display as follows:
Status
Display
Mode
VFO Status
S-meter /
Power Meter
Waterfall
Display
Power on/off
Turn on/off Transceiver
1. Turn on: press PWR button.
2. Turn off: Power on state, Hold press
12
Input
Voltage
Volume
Receive
Bandwidth
Display
SWR
Sighal
Level
Waterfall
Image
Display
button 1 second.
Power button
To turn OFF LCD screen (save batt power):
When the G90 is ON, quickly tap the main PWR button and the LCD screen will
power off.
The radio will remain ON. Hit any button on the radio to turn the LCD screen
back ON. Tap the LOCK button and the LCD will step through different brightness
levels.

Bands Selection

Operating frequency band selection
The G90's frequency range covers 0.5 to 30 MHz. Amateur frequencies within
this range are divided into 10 bands. Band switching can be performed in a
number of different ways. SW bands are included.
To Change Operating Band:
Press the BAND < or > button. This will increment or decrement through the
Ham bands.
3.5MHz
1.8MHz 5.2MHz
28MHz
24MHz
13
7.0MHz 14MHz
10MHz
21MHz 18MHz