Function Buttons - XIEGU G90 Benutzerhandbuch

Function Buttons

The G90's common functions are distributed on the various function keys. Some
function keys have a second function. When the function is selected, turn the
main knob to adjust the value.
Operation of the second function:
Press the [FUNC] button at first, the "F" indicator will light, then press the
corresponding function button.
Press the [FUNC] button again to exit the second function. At this time, the
"F" indicator is off.
In any function (including the second function of FUNC), press the main knob
inwards to exit and return to the main interface.
Button function table
Button Func1 (press, cycle)
PRE--ATT--Normal
PRE/ATT
Turn on transmit voice
CMP/F-L
compression
Turn on Noise Blanker-on
NB/F-H
/ off, Level, Width
AGC off, AGC-S, AGC-F,
AGC/SPL
AGC-Auto
Switch VFO / Memory
VM.
Turn on channel storage
MW/MC
Switch between VFO-A and
A/B.A>B
VFO-B
Turn on/off the auto antenna
TUNE
tuner
Func 2 (FUNC+) Hold press
/
Digital filter F-L low-end
/
frequency selection
Digital filter F-H high-end
/
frequency selection
Turn on split frequency
/
transceiver operation mode
To be determined
/
Turn on channel clear mode
/
Copy the current VFO to the
/
background VFO
Start antenna
/
tuner tuning
20
Button Func1 (press, cycle)
POWER
Transmit power setting
POW
SWR THR
Standing wave protection
threshold
SPEED
CW key speed setting
M/L/R Manual/automatic
left and right mode switching
MODE
KEY
iambic A/B Mode switching
QSK CW Break-In On/Off
QSK Time
CW QSK Hold Time Setting
5-level screen backlight
LOCK
brightness setting
Func 2 (FUNC+) Hold press
MIC GAIN
/
MIC gain setting
INPUT
/
Voice input selection
CW Volume
/
Side-tone volume setting
CW TONE
/
Side-tone frequency setting
/
/
/ /
/ /
SCALE Spectrum reference Lock button
level setting
21