Specifications; General Safety Rules - Makita BJR181 Betriebsanleitung

ENGLISH
1. Red part
2. Button
3. Battery cartridge
4. Shoe
5. Shoe button
6. Lock-off button

SPECIFICATIONS

Length of stroke
Strokes per minute (min
Max. cutting capacities
Overall length
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the tool. Be sure
that you understand their meaning before use.
Only for EU countries
Do not dispose of electric equipment together with house-
hold waste material!
In observance of European Directive 2002/96/EC on
waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electric equip-
ment that have reached the end of their life must be
collected separately and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for sawing wood, plastic and ferrous
materials.
4
Explanation of general view
7. Switch trigger
8. Lamp
9. Hook
10. Blade clamp sleeve
11. Released position
12. Fixed position
Model
-1
)
Pipe
Wood
Net weight

GENERAL SAFETY RULES

END001-1
WARNING:
Read all instructions. Failure to follow all instructions
listed below may result in electric shock, fire and/or seri-
ous injury. The term "power tool" in all of the warnings
listed below refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
Work area safety
1. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable liq-
uids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
3. Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded sur-
faces such as pipes, radiators, ranges and refrig-
erators. There is an increased risk of electric shock if
your body is earthed or grounded.
6. Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
13. Blade
14. Blade clamp lever
15. Limit mark
16. Brush holder cap
17. Screwdriver
BJR181
28 mm
0 - 2,900
130 mm
255 mm
499 mm
3.7 kg
D.C. 18 V
GEA002-3