Sony SCA-S30 Bedienungsanleitung Seite 38

6
Connect the audio signal cable and power cables to the speaker.
A Loosen the adjustment bolts on the left and right sides of the speaker as much as
possible, and adjust the angle of the speaker as shown.
B Connect the audio signal cable to the AUDIO IN connector, the power cables to the
power input connector (24 V AC), and the grounding wire to the grounding terminal
(U).
• Secure the audio signal cable onto the cable holder to prevent disconnections.
• The unit should always be grounded.
AUDIO IN connector
Cable holder
Power cable
Audio signal cable
12 Installation
GB
Adjustment bolts (left and right)
Power input connector (24 V AC)
Grounding terminal (U)
Power cable