Oil Level Check - Bosch TCE 5210 Instandsetzungsanleitung

8. Remove the extension used for the insertion and
tighten the provided slider adjusters;
9. Insert the stem of the cylinder in the appropriate
hole and tighten thoroughly the counter-nut;
10.
Move a couple of times the trolley in both direc-
tions in order to let the new sliders adjust;
11. Tighten again the sliders adjusters and move a cou-
ple of times the trolley in both directions. Repeat
this operation until the adjusters remain sufficiently
tight.
12. Now tighten manually the adjusters and with the
key give another ½ turn and tighten also definitively
the counter-nuts.
Robert Bosch GmbH
Hydraulic oils comparison table | TCE 5210 | 31
13. Reassemble all coverings and metal sheets previ-
ously disassembled.
4. Hydraulic oils comparison
table
In the event that after some repairs, oil losses, replace-
ments of items or other, it is necessary to restore the
correct level of any oil type, follow what is reported in
the table below.
Type Model
Gearbox oil Esso Spar-
tan EP 460
Hydrau- Esso Nuto H46
lic pump oil
Pneumatic sys- Esso Febis K32
tem lubricating oil
4.1

Oil level check

To do that power off the machinery and unscrew the
cap with measuring rod on the hydraulic control unit
and check that the oil level is between MIN and MAX.
en
Standards
ISO 460
DIN 51502-CLP
ISO 34-98-CC
ISO 46
DIN 51502-HLP
DIN 51524 PART.2-HLP
ISO 67-43-HM
ISO 32
|
1 695 400 317 2008-10-17