OJ Electronics ETO2 Bedienungsanleitung Seite 2

Type ETO
Type ETO2 is an electronic controller for fully
automatic, economical ice and snow melting on
outdoor areas and in gutters. Ice forms due to a
combination of low temperature and moisture. ETO2
detects both temperature and moisture and the
snow melting system will usually only be activated if
snow or ice is present. ETO2 is suitable for
controlling electric heating cables or water-based
heating pipes.
Product programme
ETO2-xxxx Thermostat.
ETOG-55 Embedded sensor for detecting
temperature and moisture.
ETOR-55 Gutter sensor for detecting moisture.
ETF-744/99 Outdoor sensor for detecting
temperature
2
CE MARKING, FOR EU
OJ Electronics A/S hereby declares that the product
is manufactured in accordance with Council
Directive 2004/108/EC on electromagnetic
compatibility (and subsequent amendments) and
Council Directive 2006/95/EEC on electrical
equipment designed for use within certain voltage
limits.
Applied standards
CAN/CSA E 60730-2-9:01, UL 60730-2-9.
The product may only be used if the complete
installation complies with current directives.
The product carries a manufacturer's warranty if
installed in accordance with these instructions and
current regulations.
English