Spare Parts; Technical Data - HANSGROHE Allegra Uno 14855 series Montageanleitung

Assembly
1. Flush through the supply pipes.
2. Place the mixer including the sealing washer in
position on the sink.
3. Slip the plastic washer, the slide washer, the
metall washer and collar nut over the hose
and threaded base and tighten the collar nut
by hand. If there is not enough space, please
use only the slide washer and the metall
without the plastic washer.
4. Tighten screws.
5. Connect the connecting hose to the angle
valves; cold right - hot left.
6. Connect a dish washer or a washing machine to
the thread DN20 (¾ ").
Large differences in pressure between the hot and
cold water supply should be balanced.

Technical Data

Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Recommended hot water temperature: 65° C
Rate of flow by 3 bars:
Rate of flow stop valve by 3 bars:
Hansgrohe single lever mixers can be used together
with hydraulically and thermically controlled continuous
flow heaters if the flow pressure is at least 1.5 bars.
To adjust the hot water limiter on single lever mixers,
please see page 12.
No adjustment is necessary when using a continuous
flow water heater.
6
English

Spare parts

1
1.1 screw cover basin
2
3
4
5
6
7
8
9
XXX = Colors
000 chrome plated
750 alux
max. 10 bars
1 - 5 bars
16 bars
max. 80° C
13 l/min
11 l/min
handle
flange
nut
cartridge cpl. basin
aerator cpl. (10)
ELASTOP stop unit
fixation cpl.
connection hose
spout cpl.
38091XXX
96338000
96468XXX
96461000
92730000
13955000
94849000
95049000
14099000
96514XXX