English; Technical Characteristics; Before First Use - Krups XP52 series Bedienungsanleitungen

English

Your machine is equipped with a filter holder which boasts three exclusive systems:
- One for the gradual tamping of the espresso ground coffee as the filter holder is being positioned
(kTS "krups Tamping System").
- Another is for ejecting the used grounds.
- The last is for using E.S.E. (Easy Serving Espresso) or soft pods.
It is also removable, and so can be frequently cleaned to be maintained in perfect working order. For your
safety, your filter holder is equipped with a locking system to keep it in place when the pressure rises.
1. DESCrIPTION
a Water compartment lid
b Detachable water tank
c Measuring spoon
d Cup warming plate
e On / Off button with LED
f Function switch
f1. Coffee position
f2. Off position
f3. Steam preheating position
f4. Steam position

2. TECHNICAL CHArACTErISTICS

n Pump: 15 bars
n Filter holder with grounds ejection system. Compatible with espresso ground coffee and all types of
pods, ESE or soft.
n Steam function
n Automatic shutoff.
n removable water compartment (capacity: 1.1 litres).
n Power: 1450 W
n Voltage: 220-240 V – 50/60 Hz
n Anti overheating safety mechanisms
n Dimensions: H. 300 mm, L. 230 mm, P. 280 mm
IMPORTANT!
Voltage for use: this appliance is designed only for use with a 220-240 V alternating
current.
Type of use: Your appliance is EXCLUSIVELY designed fOR USE IN THE HOME.
3. TIPS
n For an espresso with intense flavour, we recommend using freshly ground special espresso coffee which
is ideal for the delicacy of this type of coffee, along with cups with a capacity not exceeding 50 ml.
n keep the espresso ground coffee in the refrigerator, in an air-tight container as it retains its flavour
longer.
n Do not fill your filter holder to the brim, but use the measuring spoon (1 tablespoon per cup).
n If you do not use the appliance for more than 5 days, rinse and drain the water tank.
n Before removing the water tank to fill or empty it, always turn the appliance off.
46
g Percolation head
h Filter holder with grounds or pod ejection
system and gradual coffee tamping system:
kTS "krups Tamping System": Compatible with
ground coffee (1 or 2 cups) and ESE or soft
pods
i Drip tray grid
Drip tray with level indicator
j
k Steam nozzle
n Always place the unit on a flat, stable, heat-resistant work surface.
n To obtain an espresso at exactly the right temperature, we recommend that you preheat your cups.
n To prolong the life of your appliance, we recommend you use a Claris Aqua Filter System F088
cartridge (accessory not included) and that you descale the appliance at regular intervals.
IMPORTANT!
Before using for the first time, after a prolonged period of inactivity or after descaling,
the appliance must be cleaned as described in paragraph 5: "BEfORE fIRST USE".

4. BEFOrE FIrST uSE

Before using your espresso machine, clean all the accessories in soapy water and dry them.
If you are not using the Claris cartridge, please refer to the paragraph here below "rINSING OF YOur
APPLIANCE".
A. INSTALLING THE CLARIS CARTRIDGE (to be done every time the cartridge is replaced)
If you are using a Claris filter cartridge, please follow the procedure to fill it with water:
n Screw the Claris filter into the bottom of the water tank.
n Fill the water tank with water and replace it (fig.2 and 3).
n Turn the appliance on by pressing the "On / Off" button (fig.4).
n Turn the switch to the "steam preheating" position. Once the light stops blinking, turn back the switch
to the "off" position.
n repeat this operation 2 more times.
n To make sure the Claris cartridge is full of water, place a container under the brewing head, turn the
switch to the "coffee" position and make sure some water is running through. If not, repeat the above
procedure.
n In this manner you can be sure that water is circulating well through the filter cartridge.
IMPORTANT:
This installation procedure must be carried out every time the cartridge is
replaced.
The Claris cartridge needs to be replaced every 2 to 3 months if it is used daily.
B. RINSING YOUR APPLIANCE (to be done on first use and after each cleaning / descaling
operation)
- RINSING OUT THE ESPRESSO CIRCUIT
Then rinse the appliance. To do so:
n Open the lid and remove the water tank using the handle (fig.1).
n Fill it with water (fig. 2).
n replace the water tank by positioning it firmly, to ensure the water inlet is in place, and close the lid
(fig.3).
n Turn the appliance on by pressing the "On / Off" button (fig.4).
n Insert the filter holder (without ground coffee) in the appliance (fig.7).
n Place a container of sufficient volume under the filter holder.
n Once the appliance has reached the right temperature, the light stops blinking. Turn the switch to the
"coffee" position (fig.8) and let all the water in the tank run through.
n If necessary, stop the operation by turning the switch to the "off" position (fig.9) to empty the container
English
47