Headphone Output; Power Switch - Peavey Tour TNT Series Bedienungsanleitung

TNT Front Panel
COMPRESSOR ON/OFF SWITCH
12
This button turns the compressor on or off.
VOLUME
13
This knob controls the overall volume of the amplifier.
DDT (Distortion Detection Technique)
™
14
This button prevents power amplifier clipping that can sound bad and damage speakers. The "IN" or
"DEFEAT" position of the switch bypasses the DDT circuit. However, Peavey recommends the DDT stay
enabled for optimum system performance.

HEADPHONE OUTPUT

15
1/4" headphone output for personal monitoring.
DDT INDICATOR LIGHT
16
When the DDT is enabled, the red Protect/ClipLED will flash when DDT is triggered. It is normal operation for
the LED to flash. However, if the LED is constantly illuminated, the gain level needs to be adjusted to prevent
possible equipment damage. When the DDT is defeated, the LED becomes a clip indicator.

POWER SWITCH

17
To apply power to the unit, flip the switch to the "On" position. The green LED will illuminate, indicating
power is being supplied.
CAUTION: The on/off switch in this unit does not break both sides of the primary mains. Hazardous
energy can be present inside the chassis even when the on/off switch is in the OFF position.
12 13 14 15 16