Led Indications - ACME BH411 Bedienungsanleitung

Answer a call
When there is an incoming call, press the power (multifunction) button on the right
(main) earphone.
While making phone calls, only the right (main) earphone produces sound.
Reject a call
Press and hold the power (multifunction) button of the right (main) earphone for 2
seconds.
End a call
To end the call, press the power (multifunction) button on the right (main) earphone.
Redial the last dialled phone number
When the BH411 is in an idle mode, you can double-click the power (multifunction)
button on the right (main) earphone to redial the last dialled number.
Play/Pause
Short press the power (multifunction) button to play or pause a movie/music.
Wearing the earphones
To properly wear the earphones:
STEP 1. Place the earphones in the ears as shown.
STEP 2. Slightly rotate the earphone until it gets tight.

LED indications

No. Status
1 Pairing
2 Standby mode
3 Call state
4 Headset charging state The indicator light of the headset is red
5 Charging case
charging state
6 Power on state
7 Power off state
8 Low battery alarm
6
Headset Performance
The indicator light of the right earphone flashes
red and blue alternately; when successfully
connected to the device, the indicator light
flashes blue once every 5 seconds.
The indicator light of the right earphone
flashes blue every 5 seconds.
In case of the incoming call, the indicator light
of the earphone flashes red every 5 seconds.
when being charged and will turn off
automatically after being fully charged.
The indicator light of the charging case is
red when being charged and will turn off
automatically after being fully charged.
The indicator light flashes blue 3 times and
then flashes red once every 5 seconds.
The indicator light flashes red 3 times.
The indicator light flashes red once every 20 seconds.