Activating The Remote Control - CAME ZF2 Kurzanleitung

Activating the remote control

-Connect the antenna's RG58 cable to the apposite terminals. al
-Lock the radiofrequency card into the electronic card AFTER CUTTING OFF THE POWER SUPPLY (or after disconnecting the batte-
D
ries).
N.B.: the electronic card only recognises the radiofrequency card when the power is on.
Memorisation
-Keep the "PROG" button on the electronic card pressed. The LED fl ashes.
A B
-Press the transmitter button you wish to memorise. The LED will stay on to show memorisation has been successful.
Disposal
This product, including the packaging, is made up of several types of materials that can be recycled.
Investigate the recycling or disposal systems of the product, complying with prevailing local legislation.
Some electronic components may contain polluting substances. Do not litter.
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.