Handset Settings; Base Station Settings; Reset - Swissvoice Aeris 114 Bedienungsanleitung

Handset settings

, select HS Settings and press OK.
• Press
• Select a function from the following list:
- Alarm – The activated alarm is displayed in standby mode by
The alarm sounds for 30 seconds or can be deactivated immediately by pressing
any key. The volume is the same as for the ringtone.
- Ring Setup – Select the desired ringer melody for internal and external calls.
- Tone Setup – Activate or deactivate the following options:
Key Tone – Every time a key is pressed, a brief beep is heard.
Battery Tone – The batteries are almost empty. Insert the handset in the
base station for charging.
Out of Range – A warning beep is sounded if you exceed the maximum
range.
- Language – Choose the language for the display texts.
- Rename HS – To better distinguish between handsets, you can give each hand-
set a name.
- HS display – Select time or handset name for idle mode display.
- Auto Answer – Just pick up the handset from the base to answer a call (without
pressing any key).
- Date & Time – Set the desired date and time format and enter date and time.

Base station settings

The system PIN on delivery is 0000.
, select BS Settings and press OK.
• Press
• Select a function from the following list:
- Delete HS – Select the handset you want to deregister.
- Dial Mode – Tone: Normal dialling procedure on analog lines. Pulse: May be
required for connecting older telephone systems. Please refer to the relevant
documentation.
- Flash Time – Select short, medium or long.
- Change PIN – You can modify the PIN code (0000 on delivery).

Reset

, select Default and press OK.
• Press
• Enter the PIN code (0000 on delivery).
• Confirm twice to reset your phone.
Aeris 114 / 114T
Aeris 114 / 114T
.
31