Troubleshooting - Somogyi Elektronic home FKC901 Bedienungsanleitung

Caution: Risk of electric shock! Do not attempt to disassemble or modify the unit or its
accessories. In case any part is damaged, immediately power off the unit and seek the
assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced by the
manufacturer, its service facility or similarly qualified personnel.
Meaning of symbol on appliance: Do not cover!
Covering the unit can cause overheating, fire or electric shock!
FEATURES
carbon fibre desk heater for warming air of indoor rooms • its radiation is made up of a high proportion of the infrared spectrum • 2 heating levels: 450 W/900 W • head part can be positioned both
horizontally and vertically • switchable oscillation (60°) • silent operation • switches off automatically when tipped over
The estimated lifespan of the carbon fibre heating element is 6000 hours and it is safe and reliable technology. Its radiation is made up of a high proportion of the infrared spectrum, while it is free
from UV and high-frequency waves. It typically radiates in the 2,5 μm to 13,4 μm IR range, which is pleasant and beneficial.
ASSEMBLY (Figure 1)
1. carrying handle
2. 90° rotatable head
3. protective grill
4. carbon fibre heating element
5. operation mode switch
6. base
7. safety switch
8. power cable
INSTALLATION
1. Before switching on for the first time, carefully remove the packaging material taking care not to damage the appliance and power cable. Do not use the product if it is damaged in any way!
2. The device can only be used in dry indoor conditions!
3. Set the appliance on a stable and horizontal surface. The free flow of warm air must be ensured for proper operation, therefore, please note the minimum installation distances indicated in Figure
2. Do not locate the appliance directly below a wall outlet!
3. Verify that the unit's main switch is in OFF „0" position.
4. Plug the unit's standard grounded AC power cable into a grounded wall outlet! Now the appliance is ready for use!
OPERATION
You can choose from the following options with the switch located on the base of the appliance:
0 turned off
I first heating level (450 W)
II second heating level (max. 900 W)
I + first heating level plus oscillation (60°)
II + second heating level plus oscillation (60°)
The head part of the appliance can be used both horizontally and vertically. Before rotation, turn off the appliance and wait until it cools down. Turn the header according to the directions indicated
by the arrows. Do not turn it over the edge positions – vertical, horizontal-, and don't strain the header.
REPLACEMENT OF THE HEATING ELEMENT
Warning! The heating element can only be replaced by the manufacturer's service facility! The appliance may not be operated without the protective grill!
The heating element operates much like a conventional incandescent light bulb. Burnt out heating elements are not covered by the warranty as they are subject to natural wear.
CLEANING & MAINTENANCE
In order to ensure optimum functioning, the unit may require cleaning at least once a month, depending on the manner of use and degree of contamination.
1. Switch off and power off the unit by unplugging it from the electric outlet before cleaning!
2. Let the appliance to cool (for at least 30 minutes).
3. Use a vacuum cleaner to clean the protective grill. The heat-reflector doesn't require cleaning.
4. Use a slightly moistened cloth to clean the unit's outer surface. Do not use aggressive cleaners. Avoid getting water inside onto the electric components of the appliance.

TROUBLESHOOTING

Cause
The unit does not heat in heating mode.
Waste equipment must not be collected separately or disposed of with household waste because it may contain components hazardous to the environment or health. Used or waste
equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in
the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste
management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.
SPECIFICATIONS
power supply: . . . . . . . . . . . . . 230 V / 50 Hz
rated power: . . . . . . . . . . . . . . 450 W / max. 900 W
size of heater: . . . . . . . . . . . . . with vertical head part: 33 x 75 x 33 cm
. . . . . . . . . . . . . . . . . . . . . . . . with horizontal head part: 64,5 x 53 x 33 cm
weight: . . . . . . . . . . . . . . . . . . 2,5 kg
length of power cable: . . . . . . . 1,4 m
Solution
Check the power supply.
Check the position of the switches.
The heating element might have burned out. Contact the manufacturer's service facility.