Swisscom Centro grande Bedienungsanleitung Seite 3

4.
Connect your new router as shown in the
4.1 Telephone socket:
4.2 Power:
5.
Switch your router on. Wait until the following white light appears on the router:
Set up Internet and/or WLAN
If the Internet is already set up, WLAN only will be set up automatically.
6.
Important! You cannot set up your Internet until the activation date.
You will then receive an SMS reminder. Your Internet will only work if you perform
all the following steps.
7.
Check if the WLAN button
follow the help
8.
Plug the Internet setup key into a USB port on your
computer.
9.
If the installation assistant does not start automatically,
click on the CD drive named "Swisscom CD".
Windows XP: Start > My Computer > Swisscom CD Drive >
Windows 7 / Vista:
Mac OSX: Swisscom CD >
10.
You can now surf the web through the WLAN. To connect additional computers
to the Internet, repeat points 7–9 on those computers.
11.
Connect your router and your computer by using the Ethernet cable (yellow plug)
if you wish to establish a LAN connection.
Did you know? Your router has WPS!
For more information, please go to www.swisscom.ch/wps.
New microfilter with
DSL cable (purple connectors)
telephone (optional)
Power supply unit
up to 10 min.
instructions on page 11.
> Computer > Swisscom CD Drive >
Start
overview illustration (p. 12–13)
is lit. If it's not, press the WLAN button or
with:
S e t u p k e y
Start
Start
9