Sony Walkman NW-HD3 Bedienungsanleitung Seite 101

The display turns off.
Connection with the computer/SonicStage
Symptom
The SonicStage software cannot
be installed.
The installation appears to have
stopped before it has fi nished.
The progress bar on the display of
your computer is not moving. The
access lamp of your computer has
not lit for a few minutes.
"PC Connect" is not displayed
when connecting to the computer
with the USB cable.
 The display automatically turns off if there is no operation for
about 30 seconds (when using the battery) or about 3 minutes
(when using the AC power adaptor) in stop mode. When
scrolling track titles, etc., the display turns off about 30 seconds
or about 3 minutes after scrolling is fi nished. Also, the display
turns off when pressing and holding MENU. For all the cases,
press any button to turn on the display again.
Case and/or corrective action
 An operating system not compatible with the software is used
(  page 10).
 All Windows applications are not closed. If you start the
installation while other programs are running, a malfunction
may occur. This is especially true for programs that require
large amounts of system resources, such as virus-check
software.
 There is not enough space on the hard disk of your computer.
You need 200 MB or more free space. Delete the unnecessary
fi les on your computer.
 Check for the appearance of an error message beneath the
installation window. Press the "Tab" key while holding
down the "Alt" key. If an error message has appeared, press
the "Enter" key. The installation will resume. If there is no
message, the installation is still in progress. Wait for a little
while longer.
 The installation is progressing normally. Please wait. The
installation may take 30 minutes or more, depending on your
CD drive or system environment.
 Please wait for the authentication of the SonicStage software.
 Another application is running on the computer. Wait for a
while and reconnect the USB cable. If the problem persists,
disconnect the USB cable, restart the computer, and then
reconnect the USB cable.
 The USB cable is not connected properly. Disconnect the USB
cable and then reconnect it.
 A USB hub is used. Connecting via a USB hub is not
guaranteed. Connect the USB cable directly to the computer.
Continued 
43
GB