Declarations Of Conformity - Whirlpool SPIW309A3WF.1 Gebrauchsanweisung

SAFETY INSTRUCTIONS
DISPOSAL OF HOUSEHOLD APPLIANCES
This appliance is manufactured with recyclable or reusable materials. Dispose of it in accordance with local waste
disposal regulations. For further information on the treatment, recovery and recycling of household electrical
appliances, contact your local authority, the collection service for household waste or the store where you purchased
the appliance. This appliance is marked in compliance with European Directive 2012/19/EU, Waste Electrical and
Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent negative
consequences for the environment and human health.
The ( )symbol on the product or on the accompanying documentation indicates that it should not be treated as
domestic waste but must be taken to an appropriate collection center for the recycling of electrical and electronic
equipment.

DECLARATIONS OF CONFORMITY

• The complete text of the declaration of conformity is present at the following website:
docs.whirlpool.eu.
• The radio equipment operates in the 2.4 GHz ISM frequency band, the maximum
radio-frequency power transmitted does not exceed 20 dBm (e.i.r.p.).
• This product includes certain open source software developed by third parties. The open
source license usage statement is available at the following website: docs.whirlpool.eu.
• This product contains Fluorinated Greenhouse Gases covered by the Kyoto Protocol,
the refrigerant gas being in a hermetically sealed system (R32, GWP 675). The maximum
refrigerant charge amount is 2.5 kg. Please refer to the rating label for detailed
information.
SAFETY INSTRUCTIONS FOR SERVICING APPLIANCE WITH SPESIFIC REFRIGERANT
• Download the complete manual for detailed installation, servicing, maintenance and
reparing methods on docs.whirlpool.eu.
• Do not use means to accelerate the defrosting process or to clean, other than those
recommended by the manufacturer.
• The appliance shall be stored in a well-ventilated area where the room size corresponds
to the room area as specified for operation; without continuously operating ignition
sources (such as; open flames, an operating gas appliance or an operating electric heater).
• Do not pierce or burn. Be aware that the refrigerants may not contain an odor.
• Any person who is involved with working on or breaking into a refrigerant circuit should
hold a current valid certificate from an industry-accredited assessment authority, which
authorizes their competence to handle refrigerants safely in accordance with an industry
recognized assessment specification. Servicing shall only be performed as recommended
by the equipment manufacturer. Maintenance and repair requiring the assisstance of other
skilled personnel shall be carried out under the supervision of the person competent in
the use of flammable refrigerants. Appliance shall be installed, operated and stored in a
room with a floor area larger than 10 m2. The installation of pipe-work shall be kept to a
room with a floor area larger than 10 m2. The pipe-work shall be compliance with national
gas regulations. The maximum refrigerant charge amount is 2.5 kg. Mechanical connectors
used indoors shall comply with ISO 14903. When mechanical connectors are reused
indoors, sealing parts shall be renewed. When flared joints are reused indoors, the flare part
shall be re fabricated. The installation of pipe-work shall be kept to a minimum. Mechanical
connections shall be accessible for maintenance purposes.
1. Transport of equipment containing flammable refrigerants shall be compliant with the
- 6 -